The mould of cable trough cover plate plays an important role in many fields and plays an irreplaceable role. It can be used to produce cable trough cover plate, which can be used in the construction of high-speed railway, railway, etc. it can help to drain the water in the railway and provide a guarantee for people's safe travel. The production of this kind of mould has been carried out by machines, which can guarantee the production speed of the mould and improve the production efficiency of the mould of the cable trough cover plate. Moreover, the production mode of the machine can liberate people from the production, guarantee the safety of workers, reduce the defective rate of the mould production and guarantee the dimension of the mould. The shape of the mold is generally rectangular, and there are many types of dimensions. The common types are 100cm, 80cm and 50cm in length, 50cm, 35cm and 25cm in width, and the thickness is generally between 15cm, 12cm and 10cm. Although the size of the cable tray cover plate mold can be adjusted according to the user's needs, the thickness of the mold is not generally The purpose of thinning treatment is to prevent the die from cracking due to the impact of raw materials in the process of production of cable trough cover plate. The outer side of the mold also has the design of the extension rib, which also provides the safety guarantee for the use of the mold.
After a long time of sunlight, the surface of the cable trough cover plate mold will turn yellow and brittle, which not only affects the appearance of the mold, but also increases the risk of fracture when the mold is used. To sum up, the mold storage warehouse should choose a dry place that can block the sun. When using the cable trench cover plate mold, attention should also be paid to the protection, and the operation should be carried out in strict accordance with the steps to avoid unnecessary damage to the mold due to improper operation during use, which may lead to the mold can not be reused seriously. After using the mold, it is also necessary to protect the mold. It is inevitable that there will be material residues on the surface of the mold. First, clean the mold with a brush, then use a detergent for deep cleaning, use a clean towel to wipe the surface of the mold, and then apply a protective agent to extend the service life.