设为365bet官网地址    收藏365bet官网地址

华彩光电365bet官网地址
      产品列表
预制件塑料模具
光伏墩模具
炕板模具
便道砖模具
井盖模具
365bet亚洲官方投注
365bet亚洲官方投注
屋檐板模具
水泥盖板模具
边沟盖板模具
      资质荣誉
      联系365bet
保定365bet官网地址
地址:保定市城东工业区
电话:18803129528
传真:0312-8103818
邮箱:107108222@qq.com
行业新闻

线缆槽模具怎么减少漏浆几率

线缆槽模具一般会使用两种材料,一种是塑料线缆槽模具,这种塑料的线缆槽模具使用上有一定的局限性,只有固定的尺寸规格才能制作,还有一种就是钢制的线缆槽模具,线缆槽模具,365bet官网地址,电缆沟模具厂家这种线缆槽模具选用钢板焊接而成,在使用时需要按照一定的操作步骤才能完成制作,这样在使用时就不会出现很多的问题,安装方便简单,对技术的要求很低。在使用前需要检查模具的表面是否完好平整,这样可以保证制作的产品的表面光滑,在使用时不容易出现粘连的情况,更换的频率很低,这就给施工方带来了很多的便利,并且在电缆的检查时会很方便。

Cable groove moulds generally use two kinds of materials, one is plastic cable groove moulds. This plastic cable groove moulds have certain limitations in use. Only fixed size specifications can be made. Another is steel cable groove moulds, cable groove moulds, cable groove moulds, cable groove moulds manufacturers of such cable groove moulds. The groove die is welded by steel plate, which needs to follow certain operation steps to complete the production. In this way, there will be no many problems in the use. The installation is convenient and simple, and the technical requirements are very low. Before using, it is necessary to check whether the surface of the die is perfect and smooth, so as to ensure that the surface of the product is smooth, it is not easy to stick when using, and the frequency of replacement is very low, which brings a lot of convenience to the construction party, and it is very convenient when the cable is inspected.

 

 

线缆槽模具检查完成后需要将其上的尘土进行清理,尘土会导致生产的产品的表面的坚实度不足,在使用时容易出现脱落的情况。接下来便是进行安装,安装时需要使用螺丝,螺丝可以使模具连接的更加紧密,在使用时不会出现缝隙,这样就在灌浆时减少了漏浆的风险,一旦漏浆会给厂商带来很多的麻烦,不仅是清理,并且也会造成制作的成本的浪费,这是不符合厂商的利益的。接下来便是进行灌浆,灌浆时需要注意,将震动棒插入到原料中,这样可以将其中的气体排出,制作的产品的坚实度会有所提高。

After the inspection of the cable groove mould, the dust on it needs to be cleaned up. The dust will lead to the insufficient firmness of the surface of the product, and it is easy to fall off when it is used. The next step is to install. Screws are needed when installing. Screws can make the mold more closely connected and there will be no cracks in use. This reduces the risk of leakage during grouting. Once the leakage causes a lot of trouble to manufacturers, not only cleaning up, but also waste of production costs. This is not in the interests of the manufacturer. Next is grouting. When grouting, attention should be paid to inserting vibrating rods into the raw materials, so that the gas can be discharged, and the firmness of the products will be improved.



【上一个】 365bet官网地址的材质应该如何选择 【下一个】 井盖模具的材质选择及应用标准


 · 365bet官网地址的生产环节必须层层把关 · 365bet官网地址选用钢模板制作更方便
 · 365bet官网地址的材质应该如何选择 · 线缆槽模具怎么减少漏浆几率

|过滤网片|流水槽钢模具|防撞墙模具|排水沟模具|隔离墩模具|流水槽模具|遮板模具|塑料盖板模具|护坡砖模具|
XML 地图 | Sitemap 地图