设为365bet官网地址    收藏365bet官网地址

华彩光电365bet官网地址
      产品列表
预制件塑料模具
光伏墩模具
炕板模具
便道砖模具
井盖模具
365bet亚洲官方投注
365bet亚洲官方投注
屋檐板模具
水泥盖板模具
边沟盖板模具
      资质荣誉
      联系365bet
保定365bet官网地址
地址:保定市城东工业区
电话:18803129528
传真:0312-8103818
邮箱:107108222@qq.com
行业新闻

电缆槽盖板模具怎么安装

电缆槽盖板模具产品种类多样包括高铁电缆槽盖板模具、水泥电缆槽、铁路电缆槽盖板模具等系列的365bet官网地址产品,这些模具产品都具有可重复使用的特点,而且具有硬度高,耐高温等优势,乐丰生产的电缆槽盖板模具具有泄水的作用,而且不容易出现破裂等情况,电缆槽盖板模具乐丰生产的模具产品在具体操作的时候节约工时,可以加快工程进度等。

Cable groove cover plate mold products include high-speed cable groove cover plate mold, cement cable groove, railway cable groove cover plate mold and other series of cable groove mold products. These mold products have the characteristics of reusability, high hardness, high temperature resistance and other advantages. The cable groove cover plate mold produced by Lefeng has the function of water leakage, and is not easy to crack. In addition, the die products produced by Lefeng Die for Cable Slot Cover Plate can save man-hour and speed up the progress of the project.

电缆槽盖板模具技术要求echnical Requirements for Cable Slot Cover Die

(1)槽体构件尺寸在满足使用功能的同时高和宽相对减小,减少工程的土石方挖掘量、节省工时、加快工程进度。

(1) The dimensions of groove components are relatively reduced in height and width while satisfying the use function, which reduces the amount of earthwork excavation, saves man-hours and speeds up the progress of the project.
      (2)槽与槽之间连接缝隙很小,连接的过程中不需要抹灰,有泄水作用。   

(2) The gap between the groove and the groove is very small, and there is no need to plaster in the process of connection, which has the function of draining water.
      (3)构件采用高频振动、高压压制而成,具有密实度高、韧性好的特点;电缆槽可打泻水孔;侧壁可打孔有利于接线盒的固定安装。

(3) Components are made of high-frequency vibration and high-pressure compression, which have the characteristics of high compactness and good toughness; cable grooves can be perforated with drainage holes; side walls can be perforated to facilitate the fixed installation of junction boxes.
      (4)电缆槽边角的R型设计,内部采用钢纤维为加强筋,分散性好、对混凝土的裹附力加强,这些都可有效避免构件掉边掉角。

(4) R-type design of cable groove edge angle, internal use of steel fiber as reinforcing bars, good dispersion, strengthening the binding force of concrete, all these can effectively avoid component edge drop angle.
      (5)电缆槽在整个工程中采用同一模具制作,保证了构件尺寸的规整统一性,使精品工程得到保障。

(5) The cable groove is manufactured by the same die in the whole project, which ensures the uniformity of component size and ensures the quality engineering.


【上一个】 便道砖模具正确使用方法 【下一个】 井盖模具工艺特点 井盖模具型号规格


 · 电缆槽盖板模具的养护方法 · 电缆槽盖板模具怎么安装

|过滤网片|流水槽钢模具|防撞墙模具|排水沟模具|隔离墩模具|流水槽模具|遮板模具|塑料盖板模具|护坡砖模具|
XML 地图 | Sitemap 地图